Fire Door Ironmongery & Closers for Sittingbourne buildings
Looking for fire door closers and ironmongery in Sittingbourne? Our supply and fit service covers ME10 and the surrounding area, including Faversham and Gillingham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Sittingbourne is about 11 miles from Maidstone. Wherever your building is in ME10, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Sittingbourne
Because Sittingbourne is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Sittingbourne
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Sittingbourne quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Sittingbourne include failed closers and hinges and seal and signage replacement.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Sittingbourne
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in Sittingbourne free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Sittingbourne quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Sittingbourne?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Kent.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Also covering towns near Sittingbourne
- Faversham (7 miles)
- Gillingham (9 miles)
- Chatham (9 miles)
- Rochester (11 miles)
- Maidstone (11 miles)
- Strood (12 miles)
Also available in Sittingbourne
- FD90 & FD120 Doorsets in Sittingbourne
- FD30 Fire Doorsets in Sittingbourne
- FD60 Fire Doorsets in Sittingbourne
- FD30S Smoke Control Doorsets in Sittingbourne
- School & Healthcare Fire Doors in Sittingbourne
- Double & Leaf-and-a-Half Fire Doors in Sittingbourne
- Stairwell & Escape Route Doors in Sittingbourne
- Fire-Rated Screens & Fanlights in Sittingbourne
- Fire Door Ironmongery & Closers across Kent
- All fire doors in Sittingbourne