Certified fire door closers and ironmongery for Gillingham
Fire Rated Doors supplies and fits fire door closers and ironmongery in Gillingham, Kent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Gillingham is about 9 miles from Maidstone. Wherever your building is in ME7, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Gillingham?
In Gillingham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Gillingham
Our guide price for fire door closers and ironmongery in Gillingham is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Gillingham
In Gillingham, fire door closers and ironmongery are typically needed in access control preparation and seal and signage replacement.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Gillingham: questions
Can you work around tenants or staff in Gillingham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do fire door closers and ironmongery in Gillingham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Gillingham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Fire Door Ironmongery & Closers near Gillingham
- Chatham (1 mile)
- Rochester (2 miles)
- Strood (3 miles)
- Gravesend (9 miles)
- Maidstone (9 miles)
- Sittingbourne (9 miles)
Other fire doors in Gillingham
- FD30 Fire Doorsets in Gillingham
- Communal & Corridor Fire Doors in Gillingham
- Acoustic Fire Doors in Gillingham
- Stairwell & Escape Route Doors in Gillingham
- Fire Doors for Homes in Gillingham
- Commercial & Office Fire Doors in Gillingham
- HMO Fire Doors in Gillingham
- Fire Door Replacement in Gillingham
- Fire Door Ironmongery & Closers across Kent
- All fire doors in Gillingham