Getting fire door closers and ironmongery fitted in Herne Bay
If your fire risk assessment in Herne Bay has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in CT6 are free and quotes are fixed and itemised.
Our Kent coverage includes Herne Bay and its neighbours Whitstable, Canterbury and Faversham; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Kent
New and replacement fire doors in Herne Bay are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Herne Bay
Our guide price for fire door closers and ironmongery in Herne Bay is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Herne Bay include seal and signage replacement and failed closers and hinges.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Seal and signage replacement
- Failed closers and hinges
- Access control preparation
- Busy corridors needing hold-open
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Herne Bay.
Is the survey in Herne Bay free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Herne Bay?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Herne Bay and the rest of Kent, including CT6 and nearby Whitstable.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Also covering towns near Herne Bay
- Whitstable (4 miles)
- Canterbury (7 miles)
- Faversham (11 miles)
- Margate (11 miles)
- Ramsgate (13 miles)
- Broadstairs (14 miles)
Other products in Herne Bay
- Composite Fire Doors in Herne Bay
- Fire Doors for Homes in Herne Bay
- Double & Leaf-and-a-Half Fire Doors in Herne Bay
- Fire Exit Doors in Herne Bay
- Commercial & Office Fire Doors in Herne Bay
- FD30S Smoke Control Doorsets in Herne Bay
- Riser & Service Cupboard Doors in Herne Bay
- Flat Entrance Fire Doors in Herne Bay
- Fire Door Ironmongery & Closers across Kent
- All fire doors in Herne Bay