Fire Door Ironmongery & Closers for Portsmouth buildings
Looking for fire door closers and ironmongery in Portsmouth? Our supply and fit service covers PO1 and the surrounding area, including Gosport and Fareham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Portsmouth surveys with other visits in Hampshire, such as Gosport and Fareham, which helps keep survey dates flexible.
Fire door rules in Portsmouth
Because Portsmouth is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Portsmouth?
Our guide price for fire door closers and ironmongery in Portsmouth is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Portsmouth include seal and signage replacement and failed closers and hinges.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Seal and signage replacement
- Failed closers and hinges
- Access control preparation
- Busy corridors needing hold-open
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Portsmouth property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Hampshire
Can you fit just one door in Portsmouth?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
Do you cover Portsmouth?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Portsmouth and the rest of Hampshire, including PO1 and nearby Gosport.
Can you work around tenants or staff in Portsmouth?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Nearby towns we cover
- Gosport (2 miles)
- Fareham (6 miles)
- Ryde (6 miles)
- Havant (6 miles)
- Waterlooville (6 miles)
- Cowes (9 miles)
Also available in Portsmouth
- Fire-Rated Screens & Fanlights in Portsmouth
- Fire Exit Doors in Portsmouth
- Stairwell & Escape Route Doors in Portsmouth
- Riser & Service Cupboard Doors in Portsmouth
- Commercial & Office Fire Doors in Portsmouth
- Fire Doors for Homes in Portsmouth
- Glazed Fire Doors in Portsmouth
- Communal & Corridor Fire Doors in Portsmouth
- Fire Door Ironmongery & Closers across Hampshire
- All fire doors in Portsmouth