Fire Door Ironmongery & Closers for Havant buildings
Need fire door closers and ironmongery in Havant? We supply and fit complete certified doorsets across Hampshire, starting with a free measure survey in and around PO9. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Whether your building is in central Havant or on its edges towards Waterlooville, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Havant
Fire doors in Havant sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of fire door closers and ironmongery in Hampshire
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Havant are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Havant include failed closers and hinges and access control preparation.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Failed closers and hinges
- Access control preparation
- Busy corridors needing hold-open
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Havant
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Havant
Do you cover Havant?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Havant and the rest of Hampshire, including PO9 and nearby Waterlooville.
Will I get certificates for the doors fitted in Havant?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Havant?
We arrange surveys around your access needs and, where possible, combine Havant visits with other work in Hampshire. Tell us your preferred dates when you enquire.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Also covering towns near Havant
- Waterlooville (2 miles)
- Portsmouth (6 miles)
- Gosport (7 miles)
- Fareham (9 miles)
- Chichester (9 miles)
- Ryde (12 miles)
Other products in Havant
- School & Healthcare Fire Doors in Havant
- Fire Door Supply & Fit in Havant
- Flat Entrance Fire Doors in Havant
- Fire-Rated Screens & Fanlights in Havant
- Timber Fire Doorsets in Havant
- Composite Fire Doors in Havant
- FD60 Fire Doorsets in Havant
- Glazed Fire Doors in Havant
- Fire Door Ironmongery & Closers across Hampshire
- All fire doors in Havant