Getting fire door closers and ironmongery fitted in Gosport
Fire Rated Doors supplies and fits fire door closers and ironmongery in Gosport, Hampshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Gosport is about 14 miles from Southampton. Wherever your building is in PO12, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Gosport?
New and replacement fire doors in Gosport are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Gosport?
Guide prices for fire door closers and ironmongery in Gosport run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Gosport include seal and signage replacement and access control preparation.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you fit just one door in Gosport?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
How quickly can you survey in Gosport?
We arrange surveys around your access needs and, where possible, combine Gosport visits with other work in Hampshire. Tell us your preferred dates when you enquire.
What does a Gosport quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Nearby towns we cover
- Portsmouth (2 miles)
- Fareham (4 miles)
- Ryde (5 miles)
- Waterlooville (7 miles)
- Havant (7 miles)
- Cowes (7 miles)
Other fire doors in Gosport
- Communal & Corridor Fire Doors in Gosport
- Commercial & Office Fire Doors in Gosport
- Riser & Service Cupboard Doors in Gosport
- Fire Door Supply & Fit in Gosport
- FD30S Smoke Control Doorsets in Gosport
- Flat Entrance Fire Doors in Gosport
- HMO Fire Doors in Gosport
- Acoustic Fire Doors in Gosport
- Fire Door Ironmongery & Closers across Hampshire
- All fire doors in Gosport