FD30 Fire Doorsets for Tyldesley buildings
Getting FD30 fire doors right in Tyldesley means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover M29 and the surrounding area, including Atherton. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Tyldesley
New and replacement fire doors in Tyldesley are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30 fire doors cost in Tyldesley?
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Tyldesley quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD30 fire doors
In Tyldesley, FD30 fire doors are typically needed in plant rooms and stores and hotel corridors.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Plant rooms and stores
- Hotel corridors
- Offices and retail back-of-house
- HMO bedrooms and kitchens
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Tyldesley
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30 fire doors in Tyldesley: questions
Can you work around tenants or staff in Tyldesley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD30 fire doors in Tyldesley need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Tyldesley?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Nearby towns we cover
- Atherton (1 mile)
- Leigh (2 miles)
- Walkden (2 miles)
- Westhoughton (3 miles)
- Farnworth (4 miles)
- Swinton (5 miles)
Other products in Tyldesley
- Composite Fire Doors in Tyldesley
- Stairwell & Escape Route Doors in Tyldesley
- FD30S Smoke Control Doorsets in Tyldesley
- Steel Fire Doors in Tyldesley
- School & Healthcare Fire Doors in Tyldesley
- Fire Doors for Homes in Tyldesley
- FD60 Fire Doorsets in Tyldesley
- Glazed Fire Doors in Tyldesley
- FD30 Fire Doorsets across Greater Manchester
- All fire doors in Tyldesley