Getting fire door closers and ironmongery fitted in Stroud
We fit fire door closers, hinges and hold-open devices in Stroud and the rest of Gloucestershire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Stroud surveys with other visits in Gloucestershire, such as Gloucester and Cirencester, which helps keep survey dates flexible.
Which rules apply in Stroud?
Fire doors in Stroud sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of fire door closers and ironmongery in Gloucestershire
Guide prices for fire door closers and ironmongery in Stroud run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are needed
In Stroud, fire door closers and ironmongery are typically needed in failed closers and hinges and seal and signage replacement.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Failed closers and hinges
- Seal and signage replacement
- Access control preparation
- Busy corridors needing hold-open
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Gloucestershire
Can you work around tenants or staff in Stroud?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Stroud?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Gloucestershire.
Which rules do fire door closers and ironmongery in Stroud need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Neighbouring areas
- Gloucester (8 miles)
- Cirencester (10 miles)
- Cheltenham (12 miles)
- Tewkesbury (17 miles)
- Yate (17 miles)
- Chippenham (20 miles)
More doorsets for Stroud
- FD60 Fire Doorsets in Stroud
- Security Fire Doors in Stroud
- Flat Entrance Fire Doors in Stroud
- Riser & Service Cupboard Doors in Stroud
- Fire Door Replacement in Stroud
- School & Healthcare Fire Doors in Stroud
- Stairwell & Escape Route Doors in Stroud
- Timber Fire Doorsets in Stroud
- Fire Door Ironmongery & Closers across Gloucestershire
- All fire doors in Stroud