Getting fire door closers and ironmongery fitted in Cirencester
We fit fire door closers, hinges and hold-open devices in Cirencester and the rest of Gloucestershire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Cirencester is about 16 miles from Gloucester; we cover both, along with Stroud, Cheltenham and Swindon.
Regulations for fire door closers and ironmongery in Gloucestershire
New and replacement fire doors in Cirencester are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Cirencester?
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Cirencester are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door closers and ironmongery are used in Cirencester
Typical uses for fire door closers and ironmongery in Cirencester include access control preparation and seal and signage replacement.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Cirencester property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about fire door closers and ironmongery in Cirencester
What does a Cirencester quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Cirencester?
We arrange surveys around your access needs and, where possible, combine Cirencester visits with other work in Gloucestershire. Tell us your preferred dates when you enquire.
Is the survey in Cirencester free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Cirencester
- Stroud (10 miles)
- Cheltenham (13 miles)
- Swindon (14 miles)
- Gloucester (16 miles)
- Chippenham (19 miles)
- Tewkesbury (20 miles)
More doorsets for Cirencester
- FD90 & FD120 Doorsets in Cirencester
- Glazed Fire Doors in Cirencester
- Riser & Service Cupboard Doors in Cirencester
- Timber Fire Doorsets in Cirencester
- Stairwell & Escape Route Doors in Cirencester
- Steel Fire Doors in Cirencester
- Composite Fire Doors in Cirencester
- Fire Exit Doors in Cirencester
- Fire Door Ironmongery & Closers across Gloucestershire
- All fire doors in Cirencester