Getting fire door closers and ironmongery fitted in Braintree
Fire Rated Doors supplies and fits fire door closers and ironmongery in Braintree, Essex. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Braintree is about 24 miles from Southend-on-Sea. Wherever your building is in CM7, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Braintree
New and replacement fire doors in Braintree are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Braintree
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Braintree quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Braintree
Typical uses for fire door closers and ironmongery in Braintree include access control preparation and seal and signage replacement.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Braintree
Is the survey in Braintree free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Braintree quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Braintree?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Neighbouring areas
- Witham (7 miles)
- Chelmsford (11 miles)
- Maldon (11 miles)
- Sudbury (14 miles)
- Haverhill (15 miles)
- Colchester (15 miles)
Other fire doors in Braintree
- Stairwell & Escape Route Doors in Braintree
- Riser & Service Cupboard Doors in Braintree
- Security Fire Doors in Braintree
- Composite Fire Doors in Braintree
- School & Healthcare Fire Doors in Braintree
- HMO Fire Doors in Braintree
- FD30S Smoke Control Doorsets in Braintree
- FD90 & FD120 Doorsets in Braintree
- Fire Door Ironmongery & Closers across Essex
- All fire doors in Braintree