Our Speke supply and fit service
For landlords, managing agents, businesses and homeowners in Speke, we provide fire door closers, hinges and hold-open devices with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Where possible we combine Speke surveys with other visits in Merseyside, such as Halewood and Garston, which helps keep survey dates flexible.
Regulations for fire door closers and ironmongery in Merseyside
Fire doors in Speke sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Fire door closers and ironmongery prices in Speke
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Speke quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Speke
Wherever they are in Speke, fire door closers and ironmongery are most often specified for access control preparation and failed closers and hinges.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Merseyside
Will I get certificates for the doors fitted in Speke?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do fire door closers and ironmongery in Speke need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Speke?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Speke
- Halewood (1 mile)
- Garston (2 miles)
- Runcorn (4 miles)
- Widnes (4 miles)
- Huyton (5 miles)
- Ellesmere Port (5 miles)
Other products in Speke
- Acoustic Fire Doors in Speke
- Steel Fire Doors in Speke
- FD30 Fire Doorsets in Speke
- FD90 & FD120 Doorsets in Speke
- HMO Fire Doors in Speke
- Commercial & Office Fire Doors in Speke
- Riser & Service Cupboard Doors in Speke
- Fire-Rated Screens & Fanlights in Speke
- Fire Door Ironmongery & Closers across Merseyside
- All fire doors in Speke