Certified FD90 and FD120 fire doors for Salisbury
Looking for FD90 and FD120 fire doors in Salisbury? Our supply and fit service covers SP1 and the surrounding area, including Andover and Totton. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Salisbury surveys with other visits in Wiltshire, such as Andover and Totton, which helps keep survey dates flexible.
Which rules apply in Salisbury?
Fire doors in Salisbury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Wiltshire
Our guide price for FD90 and FD120 fire doors in Salisbury is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Salisbury include separating walls with long ratings and high fire-load stores.
Wiltshire is anchored by Swindon's offices and warehouses, with Salisbury, Trowbridge and Chippenham adding period conversions and schools.
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Wiltshire
Will I get certificates for the doors fitted in Salisbury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Salisbury?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Salisbury and the rest of Wiltshire, including SP1 and nearby Andover.
Can you work around tenants or staff in Salisbury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
FD90 & FD120 Doorsets near Salisbury
- Andover (16 miles)
- Totton (17 miles)
- Southampton (20 miles)
- Eastleigh (20 miles)
- Winchester (20 miles)
- New Milton (22 miles)
Other products in Salisbury
- Fire Door Supply & Fit in Salisbury
- Commercial & Office Fire Doors in Salisbury
- Fire Exit Doors in Salisbury
- FD30S Smoke Control Doorsets in Salisbury
- Communal & Corridor Fire Doors in Salisbury
- Flat Entrance Fire Doors in Salisbury
- Double & Leaf-and-a-Half Fire Doors in Salisbury
- FD60 Fire Doorsets in Salisbury
- FD90 & FD120 Doorsets across Wiltshire
- All fire doors in Salisbury