Getting communal fire doors fitted in Salisbury
Fire Rated Doors supplies and fits communal fire doors in Salisbury, Wiltshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our Wiltshire coverage includes Salisbury and its neighbours Andover, Totton and Southampton; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Salisbury
Fire doors in Salisbury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do communal fire doors cost in Salisbury?
Our guide for communal fire doors is £1,600–£3,200 per pair fitted, ex VAT. Quotes for Salisbury are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Salisbury
Typical uses for communal fire doors in Salisbury include blocks of flats and sheltered and supported housing.
Wiltshire is anchored by Swindon's offices and warehouses, with Salisbury, Trowbridge and Chippenham adding period conversions and schools.
- Blocks of flats
- Sheltered and supported housing
- Student accommodation
- Hotels
What's in the doorset
| Rating | FD30S typical; FD60S in some lobbies |
|---|---|
| Configuration | Singles, pairs and leaf-and-a-half |
| Glazing | Vision panels sized to the doorset's evidence |
| Hold-open | Alarm-linked magnetic hold-open or free-swing closers (BS EN 1155) |
| Accessibility | Opening forces and vision panels to accessibility guidance (Approved Document M in England) |
See the full specification and options for Communal & Corridor Fire Doors
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Wiltshire
Do you cover Salisbury?
Yes. We survey, supply and fit communal fire doors throughout Salisbury and the rest of Wiltshire, including SP1 and nearby Andover.
Can you fit just one door in Salisbury?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Wiltshire.
Will I get certificates for the doors fitted in Salisbury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you replace doors while the building is occupied?
Yes. We phase work so escape routes are maintained, and plan each door to be removed and replaced the same day. If that isn't possible, the opening is made secure and we tell you in advance.
Neighbouring areas
- Andover (16 miles)
- Totton (17 miles)
- Southampton (20 miles)
- Eastleigh (20 miles)
- Winchester (20 miles)
- New Milton (22 miles)
More doorsets for Salisbury
- Commercial & Office Fire Doors in Salisbury
- Riser & Service Cupboard Doors in Salisbury
- HMO Fire Doors in Salisbury
- FD60 Fire Doorsets in Salisbury
- FD90 & FD120 Doorsets in Salisbury
- Acoustic Fire Doors in Salisbury
- Double & Leaf-and-a-Half Fire Doors in Salisbury
- Fire Exit Doors in Salisbury
- Communal & Corridor Fire Doors across Wiltshire
- All fire doors in Salisbury