Getting FD90 and FD120 fire doors fitted in New Milton
If your fire risk assessment in New Milton has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in BH25 are free and quotes are fixed and itemised.
New Milton is about 16 miles from Southampton. Wherever your building is in BH25, we arrange survey and fitting dates around access and occupancy.
Fire door rules in New Milton
In New Milton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Hampshire
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for New Milton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in New Milton
High fire-load stores and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in New Milton as elsewhere.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in New Milton: questions
What does a New Milton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in New Milton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in New Milton?
We arrange surveys around your access needs and, where possible, combine New Milton visits with other work in Hampshire. Tell us your preferred dates when you enquire.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Christchurch (5 miles)
- Bournemouth (10 miles)
- Hythe (14 miles)
- Totton (14 miles)
- Poole (14 miles)
- Southampton (16 miles)
Other fire doors in New Milton
- Security Fire Doors in New Milton
- Double & Leaf-and-a-Half Fire Doors in New Milton
- FD30 Fire Doorsets in New Milton
- Fire-Rated Screens & Fanlights in New Milton
- Composite Fire Doors in New Milton
- School & Healthcare Fire Doors in New Milton
- Commercial & Office Fire Doors in New Milton
- Fire Door Supply & Fit in New Milton
- FD90 & FD120 Doorsets across Hampshire
- All fire doors in New Milton