FD90 and FD120 fire doors in Aston: how we work
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Aston and the rest of West Midlands. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our West Midlands coverage includes Aston and its neighbours Birmingham, Washwood Heath and Smethwick; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in West Midlands
Because Aston is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in West Midlands
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Aston quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Aston, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and transformer and switch rooms.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Aston
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in West Midlands
What does a Aston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Aston.
Which rules do FD90 and FD120 fire doors in Aston need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Birmingham (1 mile)
- Washwood Heath (2 miles)
- Smethwick (4 miles)
- Acocks Green (4 miles)
- West Bromwich (5 miles)
- Sutton Coldfield (6 miles)
Other fire doors in Aston
- Stairwell & Escape Route Doors in Aston
- Composite Fire Doors in Aston
- School & Healthcare Fire Doors in Aston
- Riser & Service Cupboard Doors in Aston
- Fire-Rated Screens & Fanlights in Aston
- FD30S Smoke Control Doorsets in Aston
- Fire Doors for Homes in Aston
- Glazed Fire Doors in Aston
- FD90 & FD120 Doorsets across West Midlands
- All fire doors in Aston