Our Washwood Heath supply and fit service
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Washwood Heath and the rest of West Midlands. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Washwood Heath is about 3 miles from Birmingham; we cover both, along with Aston, Birmingham and Acocks Green.
Fire door rules in Washwood Heath
New and replacement fire doors in Washwood Heath are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD90 and FD120 fire doors cost in Washwood Heath?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Washwood Heath quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are used in Washwood Heath
High fire-load stores and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in Washwood Heath as elsewhere.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Washwood Heath
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Washwood Heath
Is the survey in Washwood Heath free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Washwood Heath?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Washwood Heath.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Washwood Heath
- Aston (2 miles)
- Birmingham (3 miles)
- Acocks Green (4 miles)
- Sutton Coldfield (4 miles)
- Smethwick (6 miles)
- Shirley (6 miles)
Also available in Washwood Heath
- Fire Doors for Homes in Washwood Heath
- Fire-Rated Screens & Fanlights in Washwood Heath
- Communal & Corridor Fire Doors in Washwood Heath
- Commercial & Office Fire Doors in Washwood Heath
- Steel Fire Doors in Washwood Heath
- Fire Door Replacement in Washwood Heath
- Fire Door Supply & Fit in Washwood Heath
- Acoustic Fire Doors in Washwood Heath
- FD90 & FD120 Doorsets across West Midlands
- All fire doors in Washwood Heath