Our Newmarket supply and fit service
We cover Newmarket and nearby Haverhill for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Newmarket is about 34 miles from Ipswich. Wherever your building is in CB8, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Newmarket
Because Newmarket is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Suffolk
Our guide price for FD90 and FD120 fire doors in Newmarket is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are used in Newmarket
Wherever they are in Newmarket, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
Suffolk's demand comes from Ipswich's waterfront flats and offices, Felixstowe's port logistics and market towns across the county.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Newmarket
Can you fit just one door in Newmarket?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Suffolk.
Is the survey in Newmarket free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Newmarket?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Newmarket
- Haverhill (11 miles)
- Ely (12 miles)
- Cambridge (12 miles)
- Bury St Edmunds (13 miles)
- Thetford (19 miles)
- Sudbury (20 miles)
Also available in Newmarket
- Timber Fire Doorsets in Newmarket
- Fire Door Replacement in Newmarket
- Acoustic Fire Doors in Newmarket
- Stairwell & Escape Route Doors in Newmarket
- FD30S Smoke Control Doorsets in Newmarket
- Fire Door Ironmongery & Closers in Newmarket
- Double & Leaf-and-a-Half Fire Doors in Newmarket
- Composite Fire Doors in Newmarket
- FD90 & FD120 Doorsets across Suffolk
- All fire doors in Newmarket