Getting FD90 and FD120 fire doors fitted in Bury St Edmunds
For landlords, managing agents, businesses and homeowners in Bury St Edmunds, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Where possible we combine Bury St Edmunds surveys with other visits in Suffolk, such as Thetford and Stowmarket, which helps keep survey dates flexible.
What the law says in Bury St Edmunds
Because Bury St Edmunds is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Suffolk
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Bury St Edmunds are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Bury St Edmunds, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
Suffolk's demand comes from Ipswich's waterfront flats and offices, Felixstowe's port logistics and market towns across the county.
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Bury St Edmunds: questions
Do you work for landlords and managing agents in Bury St Edmunds?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bury St Edmunds.
Can you work around tenants or staff in Bury St Edmunds?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Bury St Edmunds
- Thetford (12 miles)
- Stowmarket (13 miles)
- Newmarket (13 miles)
- Sudbury (14 miles)
- Haverhill (16 miles)
- Ely (22 miles)
Other products in Bury St Edmunds
- HMO Fire Doors in Bury St Edmunds
- Composite Fire Doors in Bury St Edmunds
- Fire Door Supply & Fit in Bury St Edmunds
- FD60 Fire Doorsets in Bury St Edmunds
- Steel Fire Doors in Bury St Edmunds
- Communal & Corridor Fire Doors in Bury St Edmunds
- Fire Doors for Homes in Bury St Edmunds
- Double & Leaf-and-a-Half Fire Doors in Bury St Edmunds
- FD90 & FD120 Doorsets across Suffolk
- All fire doors in Bury St Edmunds