Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Renfrew

We supply and fit FD90 and FD120 fire doors in Renfrew (PA4) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,900 per single doorset in Renfrew, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Renfrew

Getting FD90 and FD120 fire doors right in Renfrew means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Renfrew is about 3 miles from Paisley; we cover both, along with Clydebank, Paisley and Bearsden.

Which rules apply in Renfrew?

In Renfrew the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

FD90 and FD120 fire doors prices in Renfrew

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Renfrew quote is fixed after survey and itemised door by door.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Typical uses in Renfrew

In Renfrew, FD90 and FD120 fire doors are typically needed in generator rooms and separating walls with long ratings.

Paisley, Renfrew and Greenock combine traditional tenements and council blocks with Glasgow Airport-related industry.

  • Generator rooms
  • Separating walls with long ratings
  • Transformer and switch rooms
  • High fire-load stores

Doorset specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

From enquiry to handover

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Can you work around tenants or staff in Renfrew?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Renfrew quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Renfrew.

Can FD120 doors have glass?

Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.

FD90 & FD120 Doorsets near Renfrew

Other products in Renfrew

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.