FD90 and FD120 fire doors in Clydebank: how we work
If your fire risk assessment in Clydebank has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in G81 are free and quotes are fixed and itemised.
Clydebank is about 6 miles from Glasgow. Wherever your building is in G81, we arrange survey and fitting dates around access and occupancy.
What the law says in Clydebank
In Clydebank the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.
Cost of FD90 and FD120 fire doors in Glasgow & Dunbartonshire
Guide prices for FD90 and FD120 fire doors in Clydebank run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Clydebank, FD90 and FD120 fire doors are most often specified for high fire-load stores and generator rooms.
Glasgow has Scotland's largest stock of tenements and high-rise flats, plus extensive student housing and offices in the city centre.
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Clydebank: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Clydebank.
Is the survey in Clydebank free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Clydebank?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Clydebank and the rest of Glasgow & Dunbartonshire, including G81 and nearby Renfrew.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Nearby towns we cover
- Renfrew (2 miles)
- Bearsden (3 miles)
- Paisley (5 miles)
- Glasgow (6 miles)
- Bishopbriggs (7 miles)
- Vale of Leven (8 miles)
Other fire doors in Clydebank
- FD60 Fire Doorsets in Clydebank
- Commercial & Office Fire Doors in Clydebank
- FD30 Fire Doorsets in Clydebank
- Timber Fire Doorsets in Clydebank
- Acoustic Fire Doors in Clydebank
- Fire Exit Doors in Clydebank
- Security Fire Doors in Clydebank
- HMO Fire Doors in Clydebank
- FD90 & FD120 Doorsets across Glasgow & Dunbartonshire
- All fire doors in Clydebank