Certified FD90 and FD120 fire doors for Brecon
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Brecon, Powys. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our Powys coverage includes Brecon and its neighbours Merthyr Tydfil, Ebbw Vale and Aberdare; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Brecon
In Brecon the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
What do FD90 and FD120 fire doors cost in Brecon?
Guide prices for FD90 and FD120 fire doors in Brecon run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are needed
In Brecon, FD90 and FD120 fire doors are typically needed in generator rooms and high fire-load stores.
Powys is mostly rural, with schools, care homes, hotels and converted agricultural and period buildings in towns such as Newtown and Brecon.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Brecon
What does a Brecon quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD90 and FD120 fire doors in Brecon need to meet?
They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Brecon?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Brecon and the rest of Powys, including LD3 and nearby Merthyr Tydfil.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Merthyr Tydfil (14 miles)
- Ebbw Vale (14 miles)
- Aberdare (16 miles)
- Rhondda (20 miles)
- Pontypool (22 miles)
- Tonypandy (22 miles)
More doorsets for Brecon
- Communal & Corridor Fire Doors in Brecon
- Fire Exit Doors in Brecon
- Flat Entrance Fire Doors in Brecon
- Fire-Rated Screens & Fanlights in Brecon
- Security Fire Doors in Brecon
- Fire Door Supply & Fit in Brecon
- Riser & Service Cupboard Doors in Brecon
- HMO Fire Doors in Brecon
- FD90 & FD120 Doorsets across Powys
- All fire doors in Brecon