Certified FD90 and FD120 fire doors for Ebbw Vale
Need FD90 and FD120 fire doors in Ebbw Vale? We supply and fit complete certified doorsets across Gwent, starting with a free measure survey in and around NP23. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Ebbw Vale is about 16 miles from Newport; we cover both, along with Merthyr Tydfil, Pontypool and Aberdare.
Which rules apply in Ebbw Vale?
In Ebbw Vale the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Cost of FD90 and FD120 fire doors in Gwent
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Ebbw Vale, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Ebbw Vale
Wherever they are in Ebbw Vale, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
Gwent centres on Newport's city centre and council estates, with Cwmbran, Pontypool and the valleys towns adding schools and industry.
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Gwent
Can you fit just one door in Ebbw Vale?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Gwent.
Will I get certificates for the doors fitted in Ebbw Vale?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD90 and FD120 fire doors in Ebbw Vale need to meet?
They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Ebbw Vale
- Merthyr Tydfil (7 miles)
- Pontypool (9 miles)
- Aberdare (11 miles)
- Cwmbran (12 miles)
- Risca (12 miles)
- Rhondda (13 miles)
More doorsets for Ebbw Vale
- FD30S Smoke Control Doorsets in Ebbw Vale
- Fire-Rated Screens & Fanlights in Ebbw Vale
- Fire Door Ironmongery & Closers in Ebbw Vale
- Fire Doors for Homes in Ebbw Vale
- Stairwell & Escape Route Doors in Ebbw Vale
- Communal & Corridor Fire Doors in Ebbw Vale
- Double & Leaf-and-a-Half Fire Doors in Ebbw Vale
- FD30 Fire Doorsets in Ebbw Vale
- FD90 & FD120 Doorsets across Gwent
- All fire doors in Ebbw Vale