Certified FD90 and FD120 fire doors for Banbury
Need FD90 and FD120 fire doors in Banbury? We supply and fit complete certified doorsets across Oxfordshire, starting with a free measure survey in and around OX16. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Banbury is about 22 miles from Oxford. Wherever your building is in OX16, we arrange survey and fitting dates around access and occupancy.
What the law says in Banbury
Because Banbury is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in Banbury
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Banbury quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Banbury
In Banbury, FD90 and FD120 fire doors are typically needed in high fire-load stores and transformer and switch rooms.
Oxfordshire combines Oxford's colleges, labs and student housing with science parks and growing towns such as Bicester and Didcot.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Banbury: questions
Will I get certificates for the doors fitted in Banbury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD90 and FD120 fire doors in Banbury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you fit just one door in Banbury?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Oxfordshire.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Banbury
- Bicester (14 miles)
- Daventry (16 miles)
- Leamington Spa (17 miles)
- Stratford-upon-Avon (18 miles)
- Warwick (18 miles)
- Witney (20 miles)
Other fire doors in Banbury
- Security Fire Doors in Banbury
- School & Healthcare Fire Doors in Banbury
- Fire Door Supply & Fit in Banbury
- Composite Fire Doors in Banbury
- Fire Exit Doors in Banbury
- Fire Door Replacement in Banbury
- Double & Leaf-and-a-Half Fire Doors in Banbury
- Fire Doors for Homes in Banbury
- FD90 & FD120 Doorsets across Oxfordshire
- All fire doors in Banbury