Our Wellingborough supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Wellingborough, Northamptonshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Wellingborough surveys with other visits in Northamptonshire, such as Rushden and Kettering, which helps keep survey dates flexible.
What the law says in Wellingborough
Because Wellingborough is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Wellingborough?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Wellingborough quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Wellingborough
Typical uses for FD90 and FD120 fire doors in Wellingborough include generator rooms and high fire-load stores.
Northamptonshire has a large logistics and warehouse sector, alongside Northampton's town-centre flats and growing new towns.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Wellingborough: questions
Is the survey in Wellingborough free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD90 and FD120 fire doors in Wellingborough need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Wellingborough quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Wellingborough
- Rushden (4 miles)
- Kettering (7 miles)
- Northampton (9 miles)
- Corby (14 miles)
- Bedford (15 miles)
- Market Harborough (16 miles)
Other fire doors in Wellingborough
- Communal & Corridor Fire Doors in Wellingborough
- Glazed Fire Doors in Wellingborough
- FD30 Fire Doorsets in Wellingborough
- Double & Leaf-and-a-Half Fire Doors in Wellingborough
- Fire-Rated Screens & Fanlights in Wellingborough
- Steel Fire Doors in Wellingborough
- Security Fire Doors in Wellingborough
- Acoustic Fire Doors in Wellingborough
- FD90 & FD120 Doorsets across Northamptonshire
- All fire doors in Wellingborough