FD90 and FD120 fire doors in Rushden: how we work
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Rushden and the rest of Northamptonshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Rushden is about 12 miles from Northampton; we cover both, along with Wellingborough, Kettering and Bedford.
What the law says in Rushden
In Rushden, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Rushden?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Rushden, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Rushden, FD90 and FD120 fire doors are most often specified for generator rooms and separating walls with long ratings.
Northamptonshire has a large logistics and warehouse sector, alongside Northampton's town-centre flats and growing new towns.
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Northamptonshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Rushden.
Do you cover Rushden?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Rushden and the rest of Northamptonshire, including NN10 and nearby Wellingborough.
Can you fit just one door in Rushden?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Northamptonshire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Rushden
- Wellingborough (4 miles)
- Kettering (9 miles)
- Bedford (12 miles)
- Northampton (12 miles)
- Corby (15 miles)
- St Neots (15 miles)
Other products in Rushden
- Security Fire Doors in Rushden
- Acoustic Fire Doors in Rushden
- Stairwell & Escape Route Doors in Rushden
- School & Healthcare Fire Doors in Rushden
- Riser & Service Cupboard Doors in Rushden
- Double & Leaf-and-a-Half Fire Doors in Rushden
- Composite Fire Doors in Rushden
- Fire Door Ironmongery & Closers in Rushden
- FD90 & FD120 Doorsets across Northamptonshire
- All fire doors in Rushden