Our Market Harborough supply and fit service
If your fire risk assessment in Market Harborough has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in LE16 are free and quotes are fixed and itemised.
Market Harborough is about 14 miles from Leicester. Wherever your building is in LE16, we arrange survey and fitting dates around access and occupancy.
What the law says in Market Harborough
In Market Harborough, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Market Harborough
Our guide price for FD90 and FD120 fire doors in Market Harborough is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Market Harborough include separating walls with long ratings and transformer and switch rooms.
Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
- Generator rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Market Harborough
- Tell us about the doors — photos help
- Free measure survey at your Market Harborough property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Market Harborough: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Market Harborough.
Which rules do FD90 and FD120 fire doors in Market Harborough need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Market Harborough?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Corby (10 miles)
- Kettering (10 miles)
- Wigston (10 miles)
- Oadby (11 miles)
- Leicester (14 miles)
- Wellingborough (16 miles)
Also available in Market Harborough
- Timber Fire Doorsets in Market Harborough
- Steel Fire Doors in Market Harborough
- HMO Fire Doors in Market Harborough
- Composite Fire Doors in Market Harborough
- Fire Doors for Homes in Market Harborough
- Stairwell & Escape Route Doors in Market Harborough
- Communal & Corridor Fire Doors in Market Harborough
- Fire Door Ironmongery & Closers in Market Harborough
- FD90 & FD120 Doorsets across Leicestershire
- All fire doors in Market Harborough