Our Market Harborough supply and fit service
Need fire door closers and ironmongery in Market Harborough? We supply and fit complete certified doorsets across Leicestershire, starting with a free measure survey in and around LE16. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Market Harborough surveys with other visits in Leicestershire, such as Corby and Kettering, which helps keep survey dates flexible.
What the law says in Market Harborough
In Market Harborough, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Market Harborough
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Market Harborough are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are needed
In Market Harborough, fire door closers and ironmongery are typically needed in failed closers and hinges and seal and signage replacement.
Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about fire door closers and ironmongery in Market Harborough
Can you fit just one door in Market Harborough?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Leicestershire.
Can you work around tenants or staff in Market Harborough?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Market Harborough?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Market Harborough
- Corby (10 miles)
- Kettering (10 miles)
- Wigston (10 miles)
- Oadby (11 miles)
- Leicester (14 miles)
- Wellingborough (16 miles)
Other products in Market Harborough
- FD30 Fire Doorsets in Market Harborough
- Fire Exit Doors in Market Harborough
- HMO Fire Doors in Market Harborough
- Composite Fire Doors in Market Harborough
- Fire Door Supply & Fit in Market Harborough
- Double & Leaf-and-a-Half Fire Doors in Market Harborough
- Timber Fire Doorsets in Market Harborough
- Flat Entrance Fire Doors in Market Harborough
- Fire Door Ironmongery & Closers across Leicestershire
- All fire doors in Market Harborough