FD90 and FD120 fire doors in Ryde: how we work
We cover Ryde and nearby Gosport for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Our Isle of Wight coverage includes Ryde and its neighbours Gosport, Sandown and Portsmouth; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Ryde
New and replacement fire doors in Ryde are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Ryde
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Ryde quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD90 and FD120 fire doors are needed
In Ryde, FD90 and FD120 fire doors are typically needed in transformer and switch rooms and generator rooms.
The Isle of Wight's hotels, holiday accommodation and care homes make up much of its fire door work, alongside town-centre flats.
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you work around tenants or staff in Ryde?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Ryde?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Isle of Wight.
Do you cover Ryde?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Ryde and the rest of Isle of Wight, including PO33 and nearby Gosport.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Ryde
- Gosport (5 miles)
- Sandown (6 miles)
- Portsmouth (6 miles)
- Newport, Isle of Wight (6 miles)
- Cowes (6 miles)
- Fareham (9 miles)
Also available in Ryde
- FD60 Fire Doorsets in Ryde
- Security Fire Doors in Ryde
- Riser & Service Cupboard Doors in Ryde
- Fire Door Ironmongery & Closers in Ryde
- Timber Fire Doorsets in Ryde
- Stairwell & Escape Route Doors in Ryde
- Composite Fire Doors in Ryde
- Glazed Fire Doors in Ryde
- FD90 & FD120 Doorsets across Isle of Wight
- All fire doors in Ryde