FD90 & FD120 Doorsets for Gosport buildings
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Gosport, Hampshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Gosport is about 14 miles from Southampton; we cover both, along with Portsmouth, Fareham and Ryde.
Fire door rules in Gosport
In Gosport, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Hampshire
Guide prices for FD90 and FD120 fire doors in Gosport run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
In Gosport, FD90 and FD120 fire doors are typically needed in high fire-load stores and transformer and switch rooms.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Gosport
Do you cover Gosport?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Gosport and the rest of Hampshire, including PO12 and nearby Portsmouth.
Will I get certificates for the doors fitted in Gosport?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Gosport?
We arrange surveys around your access needs and, where possible, combine Gosport visits with other work in Hampshire. Tell us your preferred dates when you enquire.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Gosport
- Portsmouth (2 miles)
- Fareham (4 miles)
- Ryde (5 miles)
- Waterlooville (7 miles)
- Havant (7 miles)
- Cowes (7 miles)
More doorsets for Gosport
- Security Fire Doors in Gosport
- Composite Fire Doors in Gosport
- Timber Fire Doorsets in Gosport
- Fire Doors for Homes in Gosport
- Acoustic Fire Doors in Gosport
- Stairwell & Escape Route Doors in Gosport
- Glazed Fire Doors in Gosport
- Flat Entrance Fire Doors in Gosport
- FD90 & FD120 Doorsets across Hampshire
- All fire doors in Gosport