Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Cowes

We supply and fit FD90 and FD120 fire doors in Cowes (PO31) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,900 per single doorset in Cowes, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Cowes

Need FD90 and FD120 fire doors in Cowes? We supply and fit complete certified doorsets across Isle of Wight, starting with a free measure survey in and around PO31. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.

Cowes is about 4 miles from Newport; we cover both, along with Newport, Ryde and Gosport.

What the law says in Cowes

In Cowes, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD90 and FD120 fire doors cost in Cowes?

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Cowes are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD90 and FD120 fire doors

Generator rooms and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in Cowes as elsewhere.

The Isle of Wight's hotels, holiday accommodation and care homes make up much of its fire door work, alongside town-centre flats.

  • Generator rooms
  • Transformer and switch rooms
  • High fire-load stores
  • Separating walls with long ratings

FD90 & FD120 Doorsets: key specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cowes.

Do you work for landlords and managing agents in Cowes?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Will I get certificates for the doors fitted in Cowes?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can FD120 doors have glass?

Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.

Nearby towns we cover

Other products in Cowes

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.