Our Watford supply and fit service
Need FD90 and FD120 fire doors in Watford? We supply and fit complete certified doorsets across Hertfordshire, starting with a free measure survey in and around WD17. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Surveys in Watford are booked around your access needs, and we cover the wider Hertfordshire area too.
Fire door rules in Watford
In Watford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Hertfordshire
Our guide price for FD90 and FD120 fire doors in Watford is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Watford, FD90 and FD120 fire doors are most often specified for generator rooms and transformer and switch rooms.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Watford
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Watford: questions
Is the survey in Watford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Watford?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Watford and the rest of Hertfordshire, including WD17 and nearby Bushey.
Can you fit just one door in Watford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hertfordshire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Bushey (2 miles)
- North Watford (2 miles)
- Rickmansworth (4 miles)
- Borehamwood (5 miles)
- Ruislip (6 miles)
- Harrow (6 miles)
Also available in Watford
- FD30S Smoke Control Doorsets in Watford
- FD30 Fire Doorsets in Watford
- Timber Fire Doorsets in Watford
- Riser & Service Cupboard Doors in Watford
- Fire Doors for Homes in Watford
- Security Fire Doors in Watford
- School & Healthcare Fire Doors in Watford
- Composite Fire Doors in Watford
- FD90 & FD120 Doorsets across Hertfordshire
- All fire doors in Watford