Our Ruislip supply and fit service
We cover Ruislip and nearby Northolt for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Ruislip surveys with other visits in Greater London, such as Northolt and Uxbridge, which helps keep survey dates flexible.
Fire door rules in Ruislip
Because Ruislip is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Ruislip
Guide prices for FD90 and FD120 fire doors in Ruislip run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in Ruislip
In Ruislip, FD90 and FD120 fire doors are typically needed in high fire-load stores and transformer and switch rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Ruislip property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
Do you work for landlords and managing agents in Ruislip?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ruislip.
Can you work around tenants or staff in Ruislip?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Northolt (3 miles)
- Uxbridge (3 miles)
- Harrow (4 miles)
- Hayes (4 miles)
- Greenford (4 miles)
- Southall (5 miles)
More doorsets for Ruislip
- Fire Door Ironmongery & Closers in Ruislip
- Riser & Service Cupboard Doors in Ruislip
- Fire-Rated Screens & Fanlights in Ruislip
- Acoustic Fire Doors in Ruislip
- Composite Fire Doors in Ruislip
- Fire Exit Doors in Ruislip
- HMO Fire Doors in Ruislip
- Communal & Corridor Fire Doors in Ruislip
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Ruislip