Our North Watford supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in North Watford, Hertfordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central North Watford or on its edges towards Watford, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in North Watford?
New and replacement fire doors in North Watford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD90 and FD120 fire doors in Hertfordshire
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for North Watford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in North Watford
Wherever they are in North Watford, FD90 and FD120 fire doors are most often specified for high fire-load stores and transformer and switch rooms.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in North Watford.
Is the survey in North Watford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in North Watford?
We arrange surveys around your access needs and, where possible, combine North Watford visits with other work in Hertfordshire. Tell us your preferred dates when you enquire.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Watford (2 miles)
- Bushey (3 miles)
- Rickmansworth (4 miles)
- Borehamwood (6 miles)
- St Albans (6 miles)
- Hemel Hempstead (6 miles)
Other products in North Watford
- Fire Door Replacement in North Watford
- Communal & Corridor Fire Doors in North Watford
- Riser & Service Cupboard Doors in North Watford
- Fire Door Supply & Fit in North Watford
- Acoustic Fire Doors in North Watford
- Double & Leaf-and-a-Half Fire Doors in North Watford
- Composite Fire Doors in North Watford
- FD30S Smoke Control Doorsets in North Watford
- FD90 & FD120 Doorsets across Hertfordshire
- All fire doors in North Watford