FD90 and FD120 fire doors in St Albans: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in St Albans, Hertfordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine St Albans surveys with other visits in Hertfordshire, such as Harpenden and Hatfield, which helps keep survey dates flexible.
Which rules apply in St Albans?
Because St Albans is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in St Albans
Guide prices for FD90 and FD120 fire doors in St Albans run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are needed
High fire-load stores and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in St Albans as elsewhere.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your St Albans property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Hertfordshire
Is the survey in St Albans free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD90 and FD120 fire doors in St Albans need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a St Albans quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Harpenden (5 miles)
- Hatfield (5 miles)
- Hemel Hempstead (5 miles)
- North Watford (6 miles)
- Welwyn Garden City (6 miles)
- Borehamwood (7 miles)
More doorsets for St Albans
- Riser & Service Cupboard Doors in St Albans
- Communal & Corridor Fire Doors in St Albans
- Timber Fire Doorsets in St Albans
- Security Fire Doors in St Albans
- Fire Door Replacement in St Albans
- Fire Exit Doors in St Albans
- Composite Fire Doors in St Albans
- Steel Fire Doors in St Albans
- FD90 & FD120 Doorsets across Hertfordshire
- All fire doors in St Albans