FD90 and FD120 fire doors in Dunfermline: how we work
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Dunfermline and the rest of Fife. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Dunfermline is one of the main towns we cover in Fife; tell us your dates and we'll arrange a survey.
Fire door rules in Dunfermline
In Dunfermline the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.
Cost of FD90 and FD120 fire doors in Fife
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Dunfermline quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Generator rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Dunfermline as elsewhere.
Fife's main towns — Dunfermline, Kirkcaldy, Glenrothes — mix newer housing, industry and public buildings, with St Andrews adding student housing.
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Dunfermline
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD90 and FD120 fire doors in Dunfermline: questions
What does a Dunfermline quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Dunfermline?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Fife.
Can you work around tenants or staff in Dunfermline?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Dunfermline
- Livingston (12 miles)
- Kirkcaldy (12 miles)
- Edinburgh (13 miles)
- Alloa (13 miles)
- Falkirk (14 miles)
- Bathgate (14 miles)
Other fire doors in Dunfermline
- Flat Entrance Fire Doors in Dunfermline
- Commercial & Office Fire Doors in Dunfermline
- FD30S Smoke Control Doorsets in Dunfermline
- Composite Fire Doors in Dunfermline
- HMO Fire Doors in Dunfermline
- School & Healthcare Fire Doors in Dunfermline
- Fire Exit Doors in Dunfermline
- Fire Doors for Homes in Dunfermline
- FD90 & FD120 Doorsets across Fife
- All fire doors in Dunfermline