Our Bathgate supply and fit service
Getting FD90 and FD120 fire doors right in Bathgate means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Bathgate is about 17 miles from Edinburgh. Wherever your building is in EH48, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Bathgate?
In Bathgate the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.
FD90 and FD120 fire doors prices in Bathgate
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Bathgate quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Bathgate include separating walls with long ratings and high fire-load stores.
Edinburgh's tenements and conversions, student housing and offices drive demand, with Livingston and the Lothian towns adding newer estates.
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Bathgate
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD90 and FD120 fire doors in Bathgate: questions
What does a Bathgate quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Bathgate free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Bathgate?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Edinburgh & the Lothians.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Bathgate
- Livingston (5 miles)
- Falkirk (9 miles)
- Airdrie (13 miles)
- Dunfermline (14 miles)
- Cumbernauld (14 miles)
- Wishaw (14 miles)
More doorsets for Bathgate
- Security Fire Doors in Bathgate
- Double & Leaf-and-a-Half Fire Doors in Bathgate
- Glazed Fire Doors in Bathgate
- Fire-Rated Screens & Fanlights in Bathgate
- Flat Entrance Fire Doors in Bathgate
- Stairwell & Escape Route Doors in Bathgate
- Fire Door Ironmongery & Closers in Bathgate
- Acoustic Fire Doors in Bathgate
- FD90 & FD120 Doorsets across Edinburgh & the Lothians
- All fire doors in Bathgate