Certified FD90 and FD120 fire doors for Witham
We cover Witham and nearby Maldon for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Witham surveys with other visits in Essex, such as Maldon and Braintree, which helps keep survey dates flexible.
Which rules apply in Witham?
Because Witham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Witham?
Guide prices for FD90 and FD120 fire doors in Witham run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are needed
Wherever they are in Witham, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and high fire-load stores.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Essex
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Witham.
Do you cover Witham?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Witham and the rest of Essex, including CM8 and nearby Maldon.
What does a Witham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
FD90 & FD120 Doorsets near Witham
- Maldon (5 miles)
- Braintree (7 miles)
- Chelmsford (9 miles)
- Colchester (13 miles)
- Wickford (14 miles)
- Rayleigh (15 miles)
Other fire doors in Witham
- Double & Leaf-and-a-Half Fire Doors in Witham
- Riser & Service Cupboard Doors in Witham
- Fire Door Supply & Fit in Witham
- Commercial & Office Fire Doors in Witham
- Stairwell & Escape Route Doors in Witham
- FD30 Fire Doorsets in Witham
- Communal & Corridor Fire Doors in Witham
- Security Fire Doors in Witham
- FD90 & FD120 Doorsets across Essex
- All fire doors in Witham