FD90 and FD120 fire doors in Maldon: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Maldon, Essex. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Maldon is about 14 miles from Southend-on-Sea; we cover both, along with Witham, Chelmsford and Rayleigh.
Which rules apply in Maldon?
Fire doors in Maldon sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Maldon?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Maldon, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are needed
Generator rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Maldon as elsewhere.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Essex
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Maldon.
Can you work around tenants or staff in Maldon?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Maldon?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Essex.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Witham (5 miles)
- Chelmsford (9 miles)
- Rayleigh (11 miles)
- Wickford (11 miles)
- Braintree (11 miles)
- Billericay (13 miles)
More doorsets for Maldon
- Fire Door Replacement in Maldon
- Fire Door Supply & Fit in Maldon
- Communal & Corridor Fire Doors in Maldon
- Commercial & Office Fire Doors in Maldon
- Stairwell & Escape Route Doors in Maldon
- Timber Fire Doorsets in Maldon
- Fire Exit Doors in Maldon
- Flat Entrance Fire Doors in Maldon
- FD90 & FD120 Doorsets across Essex
- All fire doors in Maldon