Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Harlow

We supply and fit FD90 and FD120 fire doors in Harlow (CM20) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,900 per single doorset in Harlow, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 and FD120 fire doors in Harlow: how we work

If your fire risk assessment in Harlow has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in CM20 are free and quotes are fixed and itemised.

Harlow is about 30 miles from Southend-on-Sea; we cover both, along with Hoddesdon, Bishop's Stortford and Waltham Abbey.

Fire door rules in Harlow

Because Harlow is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

FD90 and FD120 fire doors prices in Harlow

Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Harlow, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Typical uses in Harlow

Wherever they are in Harlow, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and high fire-load stores.

Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.

  • Transformer and switch rooms
  • High fire-load stores
  • Separating walls with long ratings
  • Generator rooms

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Questions about FD90 and FD120 fire doors in Harlow

Do you work for landlords and managing agents in Harlow?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Will I get certificates for the doors fitted in Harlow?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Harlow?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Also covering towns near Harlow

Other products in Harlow

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.