Getting FD90 and FD120 fire doors fitted in Cheshunt
Getting FD90 and FD120 fire doors right in Cheshunt means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover EN8 and the surrounding area, including Waltham Abbey. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Hertfordshire
Because Cheshunt is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Hertfordshire
Our guide price for FD90 and FD120 fire doors in Cheshunt is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Wherever they are in Cheshunt, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and generator rooms.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Cheshunt
Which rules do FD90 and FD120 fire doors in Cheshunt need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Cheshunt free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Cheshunt?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Neighbouring areas
- Waltham Abbey (1 mile)
- Enfield (4 miles)
- Hoddesdon (4 miles)
- Chingford (5 miles)
- Edmonton (6 miles)
- Potters Bar (6 miles)
Also available in Cheshunt
- Stairwell & Escape Route Doors in Cheshunt
- Composite Fire Doors in Cheshunt
- Fire Door Supply & Fit in Cheshunt
- FD60 Fire Doorsets in Cheshunt
- HMO Fire Doors in Cheshunt
- Fire-Rated Screens & Fanlights in Cheshunt
- Riser & Service Cupboard Doors in Cheshunt
- Communal & Corridor Fire Doors in Cheshunt
- FD90 & FD120 Doorsets across Hertfordshire
- All fire doors in Cheshunt