Getting FD90 and FD120 fire doors fitted in Brentwood
Getting FD90 and FD120 fire doors right in Brentwood means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Essex coverage includes Brentwood and its neighbours Billericay, Hornchurch and Romford; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Brentwood?
Because Brentwood is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Brentwood?
Our guide price for FD90 and FD120 fire doors in Brentwood is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD90 and FD120 fire doors are needed
Transformer and switch rooms and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Brentwood as elsewhere.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Brentwood
Which rules do FD90 and FD120 fire doors in Brentwood need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How quickly can you survey in Brentwood?
We arrange surveys around your access needs and, where possible, combine Brentwood visits with other work in Essex. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Brentwood?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Billericay (5 miles)
- Hornchurch (6 miles)
- Romford (6 miles)
- Basildon (7 miles)
- Dagenham (7 miles)
- South Ockendon (8 miles)
Also available in Brentwood
- FD30S Smoke Control Doorsets in Brentwood
- Glazed Fire Doors in Brentwood
- School & Healthcare Fire Doors in Brentwood
- Double & Leaf-and-a-Half Fire Doors in Brentwood
- Commercial & Office Fire Doors in Brentwood
- Fire Doors for Homes in Brentwood
- FD30 Fire Doorsets in Brentwood
- Composite Fire Doors in Brentwood
- FD90 & FD120 Doorsets across Essex
- All fire doors in Brentwood