Our Christchurch supply and fit service
We cover Christchurch and nearby Bournemouth for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Christchurch is about 4 miles from Bournemouth; we cover both, along with Bournemouth, New Milton and Poole.
What the law says in Christchurch
Fire doors in Christchurch sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Dorset
Our guide price for FD90 and FD120 fire doors in Christchurch is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are needed
Transformer and switch rooms and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Christchurch as elsewhere.
Dorset's coastal towns have many converted houses, holiday flats and care homes, especially around Bournemouth, Poole and Christchurch.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Christchurch: questions
Which rules do FD90 and FD120 fire doors in Christchurch need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Christchurch free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Christchurch?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Christchurch and the rest of Dorset, including BH6 and nearby Bournemouth.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
FD90 & FD120 Doorsets near Christchurch
- Bournemouth (4 miles)
- New Milton (5 miles)
- Poole (9 miles)
- Totton (18 miles)
- Hythe (19 miles)
- Southampton (20 miles)
More doorsets for Christchurch
- Acoustic Fire Doors in Christchurch
- Timber Fire Doorsets in Christchurch
- FD60 Fire Doorsets in Christchurch
- Double & Leaf-and-a-Half Fire Doors in Christchurch
- HMO Fire Doors in Christchurch
- FD30 Fire Doorsets in Christchurch
- Steel Fire Doors in Christchurch
- Stairwell & Escape Route Doors in Christchurch
- FD90 & FD120 Doorsets across Dorset
- All fire doors in Christchurch