Certified FD90 and FD120 fire doors for Golborne
We cover Golborne and nearby Newton-le-Willows for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Golborne surveys with other visits in Greater Manchester, such as Newton-le-Willows and Ashton-in-Makerfield, which helps keep survey dates flexible.
Fire door rules in Golborne
Fire doors in Golborne sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Greater Manchester
Our guide price for FD90 and FD120 fire doors in Golborne is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Wherever they are in Golborne, FD90 and FD120 fire doors are most often specified for high fire-load stores and separating walls with long ratings.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Golborne: questions
Which rules do FD90 and FD120 fire doors in Golborne need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Golborne free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Golborne?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Newton-le-Willows (2 miles)
- Ashton-in-Makerfield (2 miles)
- Leigh (4 miles)
- Hindley (4 miles)
- Wigan (5 miles)
- Atherton (6 miles)
Other products in Golborne
- Fire Doors for Homes in Golborne
- Riser & Service Cupboard Doors in Golborne
- FD60 Fire Doorsets in Golborne
- Double & Leaf-and-a-Half Fire Doors in Golborne
- HMO Fire Doors in Golborne
- Composite Fire Doors in Golborne
- Timber Fire Doorsets in Golborne
- Fire Door Replacement in Golborne
- FD90 & FD120 Doorsets across Greater Manchester
- All fire doors in Golborne