FD60 fire doors in Reigate: how we work
Looking for FD60 fire doors in Reigate? Our supply and fit service covers RH2 and the surrounding area, including Redhill and Horley. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Reigate is about 16 miles from Woking. Wherever your building is in RH2, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Reigate?
New and replacement fire doors in Reigate are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Reigate
Guide prices for FD60 fire doors in Reigate run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Reigate
Wherever they are in Reigate, FD60 fire doors are most often specified for compartment walls and higher-risk stores.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Reigate
Will I get certificates for the doors fitted in Reigate?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Reigate free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Reigate?
Yes. We survey, supply and fit FD60 fire doors throughout Reigate and the rest of Surrey, including RH2 and nearby Redhill.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Reigate
- Redhill (1 mile)
- Horley (5 miles)
- Banstead (6 miles)
- Caterham (6 miles)
- Coulsdon (6 miles)
- Leatherhead (7 miles)
Other fire doors in Reigate
- HMO Fire Doors in Reigate
- Stairwell & Escape Route Doors in Reigate
- Glazed Fire Doors in Reigate
- Fire Exit Doors in Reigate
- FD30S Smoke Control Doorsets in Reigate
- Fire Doors for Homes in Reigate
- Fire Door Replacement in Reigate
- Double & Leaf-and-a-Half Fire Doors in Reigate
- FD60 Fire Doorsets across Surrey
- All fire doors in Reigate