Certified FD60 fire doors for Banstead
For landlords, managing agents, businesses and homeowners in Banstead, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Banstead is about 15 miles from Woking; we cover both, along with Sutton, Ewell and Epsom.
What the law says in Banstead
New and replacement fire doors in Banstead are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Banstead
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Banstead, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Banstead include stair cores in taller blocks and higher-risk stores.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Surrey
Can you work around tenants or staff in Banstead?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Banstead free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Banstead?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Sutton (2 miles)
- Ewell (2 miles)
- Epsom (2 miles)
- Coulsdon (3 miles)
- Carshalton (4 miles)
- Wallington (4 miles)
Other products in Banstead
- FD30S Smoke Control Doorsets in Banstead
- FD30 Fire Doorsets in Banstead
- Composite Fire Doors in Banstead
- Security Fire Doors in Banstead
- Timber Fire Doorsets in Banstead
- Acoustic Fire Doors in Banstead
- Fire Exit Doors in Banstead
- Fire Door Ironmongery & Closers in Banstead
- FD60 Fire Doorsets across Surrey
- All fire doors in Banstead