Our Renfrew supply and fit service
Getting FD60 fire doors right in Renfrew means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Renfrewshire & Inverclyde coverage includes Renfrew and its neighbours Clydebank, Paisley and Bearsden; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Renfrew
Fire doors in Renfrew follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
Guide prices in Renfrew
Guide prices for FD60 fire doors in Renfrew run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD60 fire doors
In Renfrew, FD60 fire doors are typically needed in higher-risk stores and plant and boiler rooms.
Paisley, Renfrew and Greenock combine traditional tenements and council blocks with Glasgow Airport-related industry.
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Renfrew
- Tell us about the doors — photos help
- Free measure survey at your Renfrew property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Renfrewshire & Inverclyde
How quickly can you survey in Renfrew?
We arrange surveys around your access needs and, where possible, combine Renfrew visits with other work in Renfrewshire & Inverclyde. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Renfrew?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Renfrew?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Renfrew
- Clydebank (2 miles)
- Paisley (3 miles)
- Bearsden (4 miles)
- Glasgow (5 miles)
- Bishopbriggs (7 miles)
- Newton Mearns (7 miles)
Other fire doors in Renfrew
- Timber Fire Doorsets in Renfrew
- Fire Door Supply & Fit in Renfrew
- Riser & Service Cupboard Doors in Renfrew
- Fire Exit Doors in Renfrew
- HMO Fire Doors in Renfrew
- Fire Door Ironmongery & Closers in Renfrew
- FD90 & FD120 Doorsets in Renfrew
- FD30S Smoke Control Doorsets in Renfrew
- FD60 Fire Doorsets across Renfrewshire & Inverclyde
- All fire doors in Renfrew