Our Glasgow supply and fit service
If your fire risk assessment in Glasgow has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in G2 are free and quotes are fixed and itemised.
We cover Glasgow and the rest of Glasgow & Dunbartonshire, with surveys arranged around your building's access and occupancy.
Regulations for FD60 fire doors in Glasgow & Dunbartonshire
Fire doors in Glasgow follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
Cost of FD60 fire doors in Glasgow & Dunbartonshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Glasgow are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are used in Glasgow
In Glasgow, FD60 fire doors are typically needed in stair cores in taller blocks and higher-risk stores.
Glasgow has Scotland's largest stock of tenements and high-rise flats, plus extensive student housing and offices in the city centre.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Glasgow
Is the survey in Glasgow free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Glasgow quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Glasgow?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Glasgow
- Rutherglen (3 miles)
- Bishopbriggs (3 miles)
- Bearsden (4 miles)
- Renfrew (5 miles)
- Cambuslang (6 miles)
- Clydebank (6 miles)
Other products in Glasgow
- FD90 & FD120 Doorsets in Glasgow
- Communal & Corridor Fire Doors in Glasgow
- FD30S Smoke Control Doorsets in Glasgow
- Fire Door Ironmongery & Closers in Glasgow
- Fire Door Supply & Fit in Glasgow
- Glazed Fire Doors in Glasgow
- Flat Entrance Fire Doors in Glasgow
- HMO Fire Doors in Glasgow
- FD60 Fire Doorsets across Glasgow & Dunbartonshire
- All fire doors in Glasgow