FD60 Fire Doorsets for Bicester buildings
Fire Rated Doors supplies and fits FD60 fire doors in Bicester, Oxfordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Bicester is about 11 miles from Oxford. Wherever your building is in OX26, we arrange survey and fitting dates around access and occupancy.
What the law says in Bicester
Fire doors in Bicester sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD60 fire doors prices in Bicester
Guide prices for FD60 fire doors in Bicester run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are needed
Wherever they are in Bicester, FD60 fire doors are most often specified for stair cores in taller blocks and plant and boiler rooms.
Oxfordshire combines Oxford's colleges, labs and student housing with science parks and growing towns such as Bicester and Didcot.
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Bicester property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD60 fire doors in Bicester: questions
Will I get certificates for the doors fitted in Bicester?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD60 fire doors in Bicester need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bicester.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Oxford (11 miles)
- Banbury (14 miles)
- Aylesbury (16 miles)
- Witney (16 miles)
- Abingdon (17 miles)
- Bletchley (19 miles)
Also available in Bicester
- Flat Entrance Fire Doors in Bicester
- FD30 Fire Doorsets in Bicester
- Security Fire Doors in Bicester
- Riser & Service Cupboard Doors in Bicester
- Fire Doors for Homes in Bicester
- Fire Exit Doors in Bicester
- Communal & Corridor Fire Doors in Bicester
- Fire Door Replacement in Bicester
- FD60 Fire Doorsets across Oxfordshire
- All fire doors in Bicester