Our Banbury supply and fit service
Getting FD60 fire doors right in Banbury means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Oxfordshire coverage includes Banbury and its neighbours Bicester, Daventry and Leamington Spa; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Banbury?
New and replacement fire doors in Banbury are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in Oxfordshire
Guide prices for FD60 fire doors in Banbury run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Banbury
Wherever they are in Banbury, FD60 fire doors are most often specified for compartment walls and stair cores in taller blocks.
Oxfordshire combines Oxford's colleges, labs and student housing with science parks and growing towns such as Bicester and Didcot.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Banbury property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Oxfordshire
Can you work around tenants or staff in Banbury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How quickly can you survey in Banbury?
We arrange surveys around your access needs and, where possible, combine Banbury visits with other work in Oxfordshire. Tell us your preferred dates when you enquire.
Is the survey in Banbury free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Banbury
- Bicester (14 miles)
- Daventry (16 miles)
- Leamington Spa (17 miles)
- Stratford-upon-Avon (18 miles)
- Warwick (18 miles)
- Witney (20 miles)
More doorsets for Banbury
- HMO Fire Doors in Banbury
- Stairwell & Escape Route Doors in Banbury
- FD30S Smoke Control Doorsets in Banbury
- Fire Door Supply & Fit in Banbury
- Fire-Rated Screens & Fanlights in Banbury
- Timber Fire Doorsets in Banbury
- Security Fire Doors in Banbury
- Glazed Fire Doors in Banbury
- FD60 Fire Doorsets across Oxfordshire
- All fire doors in Banbury