Certified FD60 fire doors for Maghull
Need FD60 fire doors in Maghull? We supply and fit complete certified doorsets across Merseyside, starting with a free measure survey in and around L31. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover L31 and the surrounding area, including Kirkby. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Maghull
Fire doors in Maghull sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Maghull
Our guide price for FD60 fire doors in Maghull is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Maghull
In Maghull, FD60 fire doors are typically needed in higher-risk stores and plant and boiler rooms.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Maghull
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Maghull.
Can you fit just one door in Maghull?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Merseyside.
Do you cover Maghull?
Yes. We survey, supply and fit FD60 fire doors throughout Maghull and the rest of Merseyside, including L31 and nearby Kirkby.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Neighbouring areas
- Kirkby (3 miles)
- Litherland (4 miles)
- Ormskirk (4 miles)
- Bootle (4 miles)
- Formby (6 miles)
- Skelmersdale (7 miles)
More doorsets for Maghull
- Steel Fire Doors in Maghull
- FD30S Smoke Control Doorsets in Maghull
- Fire Exit Doors in Maghull
- Composite Fire Doors in Maghull
- Acoustic Fire Doors in Maghull
- Fire Door Supply & Fit in Maghull
- Stairwell & Escape Route Doors in Maghull
- Double & Leaf-and-a-Half Fire Doors in Maghull
- FD60 Fire Doorsets across Merseyside
- All fire doors in Maghull